FM

Aviation Face Milling Cutter

航太專用平面斜刃鉸刀

background
tool,Aviation-Face Milling Cutter
  • Norm：under NAS standard.
  • Application：Apply to professional aerospace industry，good at Titanium,Stainless steel, Monel and similar high-strength fasteners...
  • Material：made of ISO standard carbide
  • Product Introduction：The assembly of aircraft structure is completed by combining specific rivet holes with blind rivets on the surface of skin of aircraft and helicopter. However, rivets are over 2 – 5 mm beyond surface which cause the surface of aircraft not smooth and delicate enough, so it is necessary to use pneumatic tools with aerospace milling cutters to make the skin of planes smooth and neat.
unit:in
Aviation-Face Milling Cutter
Order Code
 Cutter Dia.(d1)
 Thick(w)
 Teeth(z)
 Angle(α)
 Hold Dia.(d2)
 R
AFC118124960 1.125 0.5 49 60° ★ ★
AFC118344960 1.125 075 49 60° ★ ★
AFC118122560 1.125 0.5 25 60° ★ ★
AFC118384960 1.125 0.375 49 60° ★ ★
AFC118123760 1.125 0.5 37 60° ★ ★
AFC118343760 1.125 0.75 37 60° ★ ★
AFC118383760 1.125 0.375 37 60° ★ ★
AFC118122560 1.125 0.5 25 60° ★ ★
AFC118342560 1.125 0.75 25 60° ★ ★
AFC1187164960 1.125 0.4375 49 60° ★ ★

Items with "★" mark are available for custom-made; welcome to receive your inquiry for other special specifications if any.

News