We're sorry! This page is not available. Please visit the BW homepage or use the search box.

Cutting fiber-reinforced composite material - Part I

Update:2012/03/26

Rougher cutters and wave groove milling cutters

The composite material,as implied by the name, is a combination of two or more materials. Generally speaking, it is constituted by a base material (matrix) and a reinforcement material (reinforcements)...

Principles of Difficult Cutting Material

Update:2012/03/19

Rougher cutters and wave groove milling cutters

The materials of high strength with poor workability or high hardness metal, makes the cutting tool life is shortened, or the volume crumbs, chip breaker difficulties, or machining surface quality is poor, or a combination of several above phenomena, therefore such materials are called difficult cutting metal materials. ...

Rougher cutters and wave groove milling cutters

Update:2012/03/05

Rougher cutters and wave groove milling cutters

The general rougher cutter reduces the cutting deformation from broadband chip into several narrower chips, which may improve the formation of curl and chip removal situation during the milling process ...

Slitter Knives

Update:2012/11/08

Cutting test  for metal ceramic end mills

Strength and dimensionally accurate bevels enable excellent cut and burr-free razor sharp edges. We use only high quality solid steel and high speed steel in the manufacturing of our slitter knives to accrue greater consistency and stable cutting. To meet your demand of wide variety material cutting, we offer large variety of material.

Cutting test for metal ceramic end mills

Update:2012/09/07

Cutting test  for metal ceramic end mills

BW cutter specialized in cutting stainless steel, which is made of the newest advanced metal ceramics, is developed for machining difficult material contenting Nickel more than 18% . This series of cutter has better flexural strength and wet cutting and it may get superior resistance and stability during machining. ....

Applied tool for automotive industry

Update:2012/02/28

Applied tool for automotive industry

Highly efficient cutting tech and tools have become the key technologies of the automotive manufacturing process. The new cutting craft like high speed cutting, dry machining, hard machining and new cutting tech has been changing ....

Characteristics of Tungsten Carbide Cutter

Update:2012/02/20

General cutting tool material

Pure carbide contains carbides and cobalt only, with best strength and anti-wear characteristics, and its strength and abrasion resistance will be reduced by adding any other substances, it is usually used for cutting cast iron and non-ferrous metal materials. But the pure carbide cannot endure high temperature, its scrap will stick on the cutter blade face easily during high heat, which causes the flank depression by its diffusion....

Discontinuous or Segmental Chips

Update:2012/02/13

General cutting tool material

Work piece will happen internal plastic deformation after machining by cutters. The degree of plastic flow directly affects the chip types. The basic forms include three types: discontinuous chip, continuous chip and continuous chip amass of edge incision.....

General cutting tool material

Update:2012/02/07

General cutting tool material

Characteristics of tool material is the major factor to influence the surface quality after machining, efficiency, and tool life.  It affords the direct cutting work during machining.   Mostly the cutting performance depends on the materials of cutting edge, the geometric parameters and the choice of the tool structure and design. ...

Production process of cutting tools

Update:2012/02/02

Production process of cutting tools

The main component is the micro powder of tungsten carbide powder is (WC, TiC), cobalt (Co) or nickel (Ni), molybdenum (Mo) as a binder, mix them under certain volume. After mixing granulation then take the raw material powder into the mold for stamping molding, to make it with the similar hardness to chalk...

Cutter wear and life

Update:2012/01/10

Cutter wear and life

Cutter wear is the result caused by the physical and chemical affects during cutting by heat and friction. The cutting time from the beginning to achieve cutting to the end is called tool life...

The super-hard thin film coating material

Update:2012/01/01

The super-hard thin film coating material

Depositing TiC, TiN, TiCN, Al2O3 ... hard ceramic coating with a few μm on carbide tool is more suitable for high speed machining than WC series, and with higher feed strength than ceramic. There are two depositing ways -- CVD (chemical vapor) and PVD method (physical vapor method).

Panticlockwise milling and clockwise milling

Update:2011/12/28

Processing method of Tungsten Carbide End Mills – anticlockwise milling (up milling) and clockwise milling (down milling)

Milling is one of the most common and most widely used processing methods, and for roughing milling of the various structural components and fine milling is almost by end milling. There are two ways, clockwise and anticlockwise milling, according to the cutting direction. The movement of the cutting edge and work piece is ...

Cutting Data for End Mills of Various Materials

Update:2011/12/19

Cutting Reference Data for End Mills of Various Materials

Effective working solution depends on correct cutters, operation method, and technology.Usual cutting conditions and major influence factors of CNC machines. ....

The cutter materials and their contrast

Update:2011/10/12

How to choose the cutting tool for hardening material above HRC50?

This list includes eight cutter materials and their contrast as below:Mono Diamond、PCD(CO PCD)、PCD(si PCD)、PCBN、Si3N4、SiC)、WC) and Steel. ....

For hardening material above HRC50?

Update:2011/10/05

How to choose the cutting tool for hardening material above HRC50?

There are higher requirements and more difficulties for many hardened molds. Hence general carbide cutters cannot reach such request of accuracy. Therefore, it should pay more attention to selection of cutting tools for hardened material. Since hardening material which HRC is above 50, with higher hardness, the carbide cutter is ....

How to choose woodworking cutters?--part2

Update:2011/09/28

Cutting Tools - Cutter selection Part-2

Selection of woodworking cutters:1.identify the main technical parameters of the cutter.2. Choose the structure type of cutter.3. The choice of the cutter rotation direction.4. Selection of cutting amount .....

How to choose woodworking cutters?--part1

Update:2011/09/28

Cutting Tools - Cutter selection Part-2

There are hard wood and wood composites material. And it may be divided into soft wood, hard wood and modified wood; wood composite materials, including plywood, laminated veneer lumber, particleboard, oriented strand board, wafer board, gypsum particle board, cement particle board, hardboard.....

Cutter selection Part-2

Update:2011/09/22

Cutting Tools - Cutter selection Part-2

There are square end mill, side cutter, angle cutter, shape cutter, end mill, T-slot cutter, semi-moon key seat cutter, dovetail cutter , as well as face milling cutter.....

Cutter selection Part-1

Update:2011/09/20

Cutting Tools - Cutter selection Part-1

Only correct type and cutting edge may do a good job for milling work. Popular end mills include flat cutter, side cutter, face milling cutter, milling cutter, end mill, sawing, and milling cutter. Its characteristics is....

What is cutting tool?

Update:2011/09/13

Cutting Tools - Characteristics of precision miniature cutting tools

There are lots of metal products around us in our life, but we all know how they are produced? There are many processing methods to make metal, cutting is the major one among them. ....

Characteristics of precision miniature cutting tools

Update:2011/09/08

Cutting Tools - Characteristics of precision miniature cutting tools

Four major cutting method:Precision micro turning,Precision micro milling,Precision micro fly cut,Precision micro drilling.There are precision micro turning tools, flat end mills, ball end mill, throwing cutter, and drills according to these applications. The working conditions, friction, impact, and .....

Characteristics of cutting tools

Update:2011/09/06

Cutting Tools - Definition and types of hard metal and difficult material

Plain Milling Cutter is the most commonly used tool in a horizontal milling machine. Plain Milling Cutter’s shape is like disc or cylindrical, which has blades on the outer circumference of the cutter for milling the plane which parallel.....

Tungsten steel cutter&super hard alloy cutter

Update:2011/09/05

Cutting Tools - Tungsten steel cutter&super hard alloy cutter

In fact, they are saying the same tool. The component is tungsten carbide (WC) and took part in the P type, M type, and K type. Micro grain carbide tool is made of tungsten carbide and adding some ......

Length of the CNC lathe clamp for cutting tools?

Update:2011/09/02

Cutting Tools - Length of the CNC lathe clamp for cutting tools?

Generally, when working project includes face cutting, outer cutting, and inner cutting three ways and rough or heavy cutting, of course we will try to extend the clamping length, and calculate the suitable pressure.......

Selections and types of End Mills

Update:2011/09/01

Cutting Tools - Selections and types of End Mills

There are many kinds of end mills, which with wide range of applications. It can be divided into the following three categories: 1. Thimble cutter for machining plane. 2.Carbide cutter for......

Definition of hard metal and difficult material

Update:2011/08/25

Cutting Tools - Definition and types of hard metal and difficult material

Hard Material: Generally it means higher hardness of the steel material which can be cut, such as alloy steel, die steel. . . etc.Applicable to the cutters with coating, such as: TiAlN, TiN. .....

How do end mills choose ?

Update:2011/08/25

PCD circular saw blades

In recent years, machining center spindle is more and more speedy. For fitting the requirement of high speed machining on high hardness and strength materials and also prolonging mold life .....

PCD circular saw blades

Update:2011/08/08

PCD circular saw blades

Designed for wood geometry, good for cutting both hard and soft wood or compound material. It can extend tool life, reduce wear, and get good cooling result. General saw glade of other brands doesn’t proceed some processes.....

3 Jaw Adjustable Oil Filter Wrench

Update:2012/01/18

3 Jaw Adjustable Oil Filter Wrench

3 Jaw Adjustable Oil Filter Wrench's characteristics:New design ensures oil filter is gripped on-center to avoid slippage.Special design of triangle grip is easy removed and replaced, it coated of artificial diamond.......

Plastic Power Inductor Machine

Update:2011/08/05

Common mode Choke Inductor machine

It is different from previous powder compression machine, plastic power inductor adopts wet feeding way and shaping by pressure and heat.The benefit is that pressure load can be reduced a lot to shape. And the finished product made.......

ZrO2 Introduction

Update:2011/08/05

Common mode Choke Inductor machine

Pure ZrO2 is a white solid. It may appear gray or light yellow if it contains some impurities. It can display other colors as it adds developer. There are three zirconium crystal forms: monoclinic, tetragonal, and cubic.Zirconium material is with many good characteristics including high hardness, high strength.......

Common mode Choke Inductor machine

Update:2011/06/11

Common mode Choke Inductor machine

BW supply and organize full production lines according to demand of Common Mode inductor producing. Common Mode Inductor whole production line: automatic winding two-lane special equipment, inductor-based visual positioning assembly machine, inductive type high-speed assembly machine, and.......

Cutting tool-90° Step Drill

Update:2011/05/15

tool-90° Step Drill

Step drill, the related accuracy in manufacture process is the most important factor for cutting quality. If the precision isn’t controlled well, it will cause hole too rough and even caused reject of work piece. Not only geometry, specification, accuracy, and surface quality, but also the drill volume are important points for the cutting quality of step drill........

Cutting tool-Circular saw with metal ceramic blade

Update:2011/04/15

tool-Circular saw with metal ceramic blade

BW’s advanced metal-ceramic brazed circular saw has better flexural strength in machining high hardness alloy which content 18% up of Ni and more superior damage resistance and stable quality in wet machining than HSS saw......

3000°C Graphite crucible

Update:2011/03/15

3000°C- Graphite crucible

Graphite used mainly on of metallurgy, specialized in producing fire-resistant materials, such as graphite crucible, blast furnace lining, heat preservation medicinal preparation and carbon agent. The melting point of graphite is higher, gasification till 4500 ° C. ......

Cutting tool-Diamond Product

Update:2011/02/15

tool-Diamond Product

BW develops PCD diamond cutting tools through long time researching. The cutter for tongue and groove wood flooring may extend long machining time and tool life. The finished products, wood flooring, achieve good quality about easy to settle and superior stability with adaption.......

SiC Granulation molding machine

Update:2011/01/15

SiC Granulation molding machine

SiC Granulation molding machine stirs the main axle by using oil pressure power which torsion is above 5 times than general pellet machines.This machine meets the CGMP requirements.The resolver of the vertical type super mixer, which can save 10% than general mixer, may reduce the production cost and increase the economic efficiency.The vertical type super mixer leaf and chopper both are located at the cover of barrel........

Cu75Ga25, Cu40In60 Target Material

Update:2010/11/15

Cu75Ga25, Cu40In60 Target Material
  • Characteristics:
    CIGS thin film solar cell precursors
  • Specifications:
    Target diameter:3"and 4" Cu75%Ga25%,Cu40%In60%
  • Application:
    Apply vacuum melting production to make target compound of CIGS thin film solar cells......

High-Entropy Alloys

Update:2010/10/15

High-Entropy Alloys
  • Characteristics:
    High-Entropy alloys is a new design concept of alloy, which use multi major composition instead of traditional single main ingredient. It has large difference than traditional one.
  • Target material diameter:
    3"and 4"
  • Application:
    Good for traditional industries which with huge requirements, endurable mold, 3C electronic mold , and high speed cutting tools.

8 flute T type Single-Angle Chamfering Cutter

Update:2010/09/15

tool-High Precision 8 flute T type Single-Angle Chamfering Cutter
  • Product:High Precision 8 flute T type Single-Angle Chamfering Cutter
  • Specification:
    Custom order according NAS standard.
  • Characteristics:
    Apply to cut aviation difficult material of alloy. For fitting the high accuracy request, the tolerance range for each flute of cutter is as the form below.

CNC 5-axis machining technology-Shoe Mold

Update:2010/08/15

CNC 5-axis machining technology-Shoe Mold" title="CNC 5-axis machining technology-Shoe Mold" /></a>
  <div class="news-description">
    <p>Shoe mold, usually refers to mould of sports shoes, sandals, slippers, and rubber shoes. Sport shoes is the main among all. Mold made from some processes like injection, extrusion, blow, casting, forging, smelting, stamping, and other methods to get the request mold and tool. It needs .............</p>
  </div>
  <div class="continu"><a href="../news/201008/cnc-5axis-technology-in-shoe-mold/">more..</a></div>
</div>

<div class="news-menu">
  <h3><a href="../news/201007/sic-regrind-nano-technology/">碳化矽再研磨奈米技術</a></h3>
  <p class="data">Update:2010/07/15</p>
  <a href="../news/201007/sic-regrind-nano-technology/"><img src="../news/201007/sic-regrind-nano-technology/images/sic-regrind-nano-technology.jpg" alt="碳化矽再研磨奈米技術" title="碳化矽再研磨奈米技術"  /></a>
  <div class="news-description">
    <p>碳化矽是常被人們使用的非氧化物陶瓷材料,碳化矽包含了一些雜質,包括矽土、矽、碳、鐵及鋁..矽的許多商業用途乃看中其極高之熔點,其硬度及化學隋性..為一種耐高溫之物質,碳化矽具有極大的抗熱能力,其導熱能力強而熱膨脹性低..股份有限公司,所使用研磨機台,研磨後的粉末可達微米及奈米級,可應用在陶瓷粉末…等材料研磨.......</p>
  </div>
  <div class="continu"><a href="../news/201007/sic-regrind-nano-technology/">more..</a></div>
</div>

<div class="news-menu">
          <h3><a href="../news/201006/sharp-top-shingle-flute-drilling-cutter/">cutting tool-尖頭單刃鑽孔切割刀具</a></h3>
          <p class="data">Update:2010/06/15</p>
          <a href="../news/201006/sharp-top-shingle-flute-drilling-cutter/"><img src="../news/201006/sharp-top-shingle-flute-drilling-cutter/images/sharp-top-shingle-flute-drilling-cutter.jpg" alt="tool-尖頭單刃鑽孔切割刀具" title="tool-尖頭單刃鑽孔切割刀具" /></a>
          <div class="news-description">
            <ul>
            	<li><strong>產品名稱:</strong>尖頭單刃鑽孔切割刀具</li>
                <li><strong>產品特色:</strong><br />針對工件如壓克力、塑膠材質等相關工件、加工特殊需求訂製品..可以快速切削工件、縮短加工時間 ....</li>
            </ul>
          </div>
          <div class="continu"><a href="../news/201006/sharp-top-shingle-flute-drilling-cutter/">more..</a></div>
        </div>
        
        <div class="news-menu">
          <h3><a href="../news/201005/precise-engraving-milling-cutter/">cutting tool-微細雕刻鑽銑刀</a></h3>
          <p class="data">Update:2010/05/15</p>
          <a href="../news/201005/precise-engraving-milling-cutter/"><img src="../news/201005/precise-engraving-milling-cutter/images/precise-engraving-milling-cutter.jpg" alt="tool-微細雕刻鑽銑刀" title="tool-微細雕刻鑽銑刀" /></a>
          <div class="news-description">
            <ul>
            	<li><strong>產品名稱:</strong><br />微細雕刻鑽銑刀(Precise Engraving Milling Cutter)</li>
                <li><strong>產品特色:</strong><br />針對軟材質如壓克力、塑膠板、墊木板等相關材質、進行微形圖面與文字雕刻、本公司皆可接受特殊規格之訂作....</li>
            </ul>
          </div>
          
          <div class="continu"><a href="../news/201005/precise-engraving-milling-cutter/">more..</a></div>
        </div>
        <div class="news-menu">
          <h3><a href="../news/201004/pcd-insert/">cutting tool-PCD聚晶鑽石車刀片</a></h3>
          <p class="data">Update:2010/04/15</p>
          <a href="../news/201004/pcd-insert/"><img src="../news/201004/pcd-insert/images/pcd-insert.jpg" alt="tool-PCD聚晶鑽石車刀片" title="tool-PCD聚晶鑽石車刀片" /></a>
          <div class="news-description">
            <ul>
            	<li><strong>產品名稱:</strong><br />PCD聚晶鑽石車刀片(PCD Insert)</li>
                <li><strong>產品特色:</strong><br />專為鋁輪圈業設計之刀具種類已有百種之多, 針對各種輪圈型式皆有對應之刀具,且對於鑄造常發生的直徑1mm以下的針孔問題(Pin Hole), 鑽石車刀片可改善其輪圈的平坦度, 隨著輪圈款式的變化繁多, 本公司皆可接受特殊規格之訂作....</li>
            </ul>
          </div>
          <div class="continu"><a href="../news/201004/pcd-insert/">more..</a></div>
        </div>
        
        <div class="news-menu">
          <h3><a href="../news/201003/inductor-powder-compacting-press/">Common mode Choke Inductor machine</a></h3>
          <p class="data">Update:2010/03/15</p>
          <a href="../news/201003/inductor-powder-compacting-press/"><img src="../news/201003/inductor-powder-compacting-press/images/inductor-powder-compacting-press.jpg" alt="Common mode Choke Inductor machine" title="Common mode Choke Inductor machine" /></a>
          <div class="news-description">
            <p>BW supply and organize full production lines according to demand of Common Mode inductor producing. Common Mode Inductor whole production line: automatic winding two-lane special equipment, inductor-based visual positioning assembly machine, inductive type high-speed assembly machine, and..........</p>
          </div>
          
          <div class="continu"><a href="../news/201003/inductor-powder-compacting-press/">more..</a></div>
        </div>
        <div class="news-menu">
          <h3><a href="../news/201002/electroplated-diamond-cbn-burs/">Cutting tool-Electroplated Diamond tools</a></h3>
          <p class="data">Update:2010/02/15</p>
          <a href="../news/201002/electroplated-diamond-cbn-burs/"><img src="../news/201002/electroplated-diamond-cbn-burs/images/electroplated-diamond-cbn-burs.jpg" alt=

Shoe mold, usually refers to mould of sports shoes, sandals, slippers, and rubber shoes. Sport shoes is the main among all. Mold made from some processes like injection, extrusion, blow, casting, forging, smelting, stamping, and other methods to get the request mold and tool. It needs ......

Grinding up to nano powders

Update:2010/07/15

Grinding up to nano powders

Silicon Carbide now is often used as non-oxide ceramic materials. Because it has better hardness, heat resistance, oxidation resistance, corrosion resistance and thermal conductivity than general ceramic materials. Hence it is widely used in structure of mechanical engineering and seal part of chemical engineering......

Cutting tool-Sharp Top Single Flute Drilling Cutter

Update:2010/06/15

Cutting tool-Sharp Top Single Flute Drilling Cutter

Specialized in working some materials like acrylic, plastic, and related ones. And work custom order according to special request. Single flute may speed the working period and shorten the time.

Cutting tool-Precise Engraving Milling Cutter

Update:2010/05/15

Cutting tool-Precise Engraving Milling Cutter

Specialized in cutting soft material like acrylic, plastic board, wood plate, …etc for engraving tiny picture and word. We may make custom order according to your special request.......

Cutting tool-PCD Inserts

Update:2010/04/15

Cutting tool-PCD Inserts

There are hundreds of cutters designed for alloy wheels. Various cutters specialized for different type of wheels are well-designed. Regarding the pin hole problem of c asting which happens in diameter under 1mm, it may be improved by using PCD cutters. We can make ........

Inductor Powder Compacting Press

Update:2010/03/15

Inductor Powder Compacting Press

Inductor is caused by the magnetic field generated by electric currents according to Ampere's law. To add Inductor to a circuit, electronic components called inductors are used, typically consisting of coils of wire to concentrate the magnetic field and to collect the induced voltage.......

Cutting tool-Electroplated Diamond tools

Update:2010/02/15

Cutting tool-Electroplated Diamond tools

This type of CBN cutter is specialized for grinding glass parts. The controller should have pecking function to avoid bad chip removal, which is related to CBN particles since the particle size is in proportion to the roughness of surface. We should say “grinding glass” instead of “cutting glass.”The spindle......

Cutting tool-Acrylic Cutting Tools

Update:2010/01/15

tool-Acrylic Cutting Tools

The width of tip bottom is 0.10~0.25mmmm. The surface of work piece is very exquisite, no blunt and any cutting trace, no acrylic remnants left in the flute gap, and the design of central point is very special........

Compound Sharpener

Update:2009/12/15

Compound Sharpener

Compound grinder may assemble two functions, re-grinding end mill, drill, tap, or carbide rod. For End Mill+Drill Sharpener, it apply to re-sharpen dia 2mm – 13mm, of square end mills with flute 2,3, 4, and 6 to make cutter sharp again.......

BW carbide cutter cut carbide material

Update:2009/11/15

BW carbide cutter cut carbide material

BW develop new type CNC cutters specialized in cutting carbide work piece, HV550°. It is difficult material. We design special geometry, which is different from traditional end mills. Since general end mills will be broken if it cuts carbide mould .......

Cutting tool-Staple Cutter

Update:2009/10/15

tool-Staple Cutter
  • Application:
    1. Anti-wear products
    2. Cutting tools
    3. Industrial cutter
    4. Electric conduction products
  • Material: HSS or carbide material

Cutting tool-Diamond cutter in grooving floors

Update:2009/09/15

Cutting tool-Diamond cutter in grooving floors

Bewise Inc. is an professional cutter manufacturer. We are experienced in researching wood cutting tool. Now we develop a new series PCD diamond cutter specialized in groove wood flooring which may improve the accuracy and stability of groove a lot. Wood floor factories focus .....

News