Powder Forming Machine

8-Ton Automatic Mechanical-Type Powder Forming Machine

8-Ton Automatic Mechanical-Type Powder Forming Machine

FEATURES:

  • Simple; easy for operation, maintenance, and inspection; very low defect rate to make precise products.
  • High stability.
  • The knuckle joint method is adopted in upper ram pressing stroke of this machine.
  • Excellent formilization.
  • High productivity.

High Capability AP-50 Pelletizer

High Capability AP-50 Pelletizer

FEATURES:

  1. Sophisticated design, precise construction and excellent function.
  2. Simple construction, automatic timing & up-and-down device, easy to operate, machine part durability and operational safely are guaranteed.
  3. Quiet and stable.
  4. East to maintain.
  5. High efficiency, accurate, and good quality.
  6. Can be used to process powder liquid, semiliquid, foods, drugs, chemicals, and feeds.

Oil Pressure - Type Powder Forming Machine

Oil Pressure - Type Powder Forming Machine

Specifications

  • 50-TONS
  • 100-TONS

Mechanical-Type Powder Forming Machine

Mechanical-Type Powder Forming Machine

Specifications

  • 12-TONS
  • 20-TONS

Vertical Type Super Mixer

Vertical Type Super Mixer

Characteristics

  1. The 25kg starch mixes the 17kg traditional Chinese medicine thick paste body, so long as two minutes then become the wet pellets.
  2. This machine stirs the main axle by using oil pressure power which torsion is above 5 times than general pellet machines.
  3. The resolver of the vertical type super mixer, which can save 10% than general mixer, may reduce the production cost and increase the economic efficiency.
  4. The vertical type super mixer leaf and chopper both are located at the cover of barrel. The bottom of barrel is big arc shape and there is no dead space in the barrel. And it is designed in main and vice knife leaves, therefore it won’t have rub overheated of raw material and cause the nature change of the product.
  5. The biggest characteristic of this equipment is that it is suitable for matching difficult process, for example, Hydroxylpropylmethylcellulose of high viscosity μ=120000 CP and carbomer μ=331150 CP. Under such situation, it still could mix averagely and pelleting quickly.
  6. The unity formation of knife leaf plus the special technology design can reach the good mix effect and reduce the air pollution.
  7. This machine meets the CGMP requirements, clean, the correct effect standard, easy to clean, and it has the superior shear and cuttings ability, coordinates the main axle knife leaf of special design spiral-shaped, may cause the circulation of fluidity to prevent the solid block, then obtains the best formed pellet.。

Applications:

Including the automatic flow to the mixing granulation project, like the western medicine preparation, the scientific traditional Chinese medicine, the concentration paste body plus the powder pelleting, the health food, the chemical product and raw material, the soap powder and the toxic material and so on. Regarding the difficult processes of the high viscosity raw material of dry and wet pelleting, heating, and cooling pelleting, may present its outstanding benefits.

Application examples :

urea resin, phenolics, melamine resin, epoxy resin, iron, carbon, selenium drum, battery raw material, feed, spice, salt, Si, CaCO3, and zeolite.

Type No. Capacity HP Effective Q’ty
/one lot
Mix knife leaf Pelleting knife leaf
DY100 100L 10 3 35kg
DY200 200L 15 5 70kg
DY300 300L 20 5 105kg
DY400 400L 30 5 140kg
DY500 500L Torsion motor is conversion into powder proportion and viscosity.
DY1200 1200L Torsion motor is conversion into powder proportion and viscosity.
*This form powder body 0.5 proportion and 70% work volume conversion into kilogram quantity

Automatic Production Line Installed With Feeding And Discharging System

Automatic Production Line Installed With Feeding And Discharging System

Characteristics

  1. The 25kg starch mixes the 17kg traditional Chinese medicine thick paste body, so long as two minutes then become the wet pellets.
  2. This machine stirs the main axle by using oil pressure power which torsion is above 5 times than general pellet machines.
  3. The resolver of the vertical type super mixer, which can save 10% than general mixer, may reduce the production cost and increase the economic efficiency.
  4. The vertical type super mixer leaf and chopper both are located at the cover of barrel. The bottom of barrel is big arc shape and there is no dead space in the barrel. And it is designed in main and vice knife leaves, therefore it won’t have rub overheated of raw material and cause the nature change of the product.
  5. The biggest characteristic of this equipment is that it is suitable for matching difficult process, for example, Hydroxylpropylmethylcellulose of high viscosity μ=120000 CP and carbomer μ=331150 CP. Under such situation, it still could mix averagely and pelleting quickly.
  6. The unity formation of knife leaf plus the special technology design can reach the good mix effect and reduce the air pollution.
  7. This machine meets the CGMP requirements, clean, the correct effect standard, easy to clean, and it has the superior shear and cuttings ability, coordinates the main axle knife leaf of special design spiral-shaped, may cause the circulation of fluidity to prevent the solid block, then obtains the best formed pellet.

Applications

Including the automatic flow to the mixing granulation project, like the western medicine preparation, the scientific traditional Chinese medicine, the concentration paste body plus the powder pelleting, the health food, the chemical product and raw material, the soap powder and the toxic material and so on. Regarding the difficult processes of the high viscosity raw material of dry and wet pelleting, heating, and cooling pelleting, may present its outstanding benefits.

Type No. Capacity HP Effective Q’ty
/ one lot
Mix knife leaf Pelleting knife leaf
DY100 100L 10 3 35kg
DY200 200L 15 5 70kg
DY300 300L 20 5 105kg
DY400 400L 30 5 140kg
DY500 500L Torsion motor is conversion into powder proportion and viscosity.
DY1200 1200L Torsion motor is conversion into powder proportion and viscosity.
*This form powder body 0.5 proportion and 70% work volume conversion into kilogram quantity.

Traditional Horizontal High-Speed Palletizing Machine

Traditional Horizontal High-Speed Palletizing Machine

Characteristics

This type is traditional high speed palletizing machine. It takes only 3~5 minutes to mingle with many major compositions including excipients, starch, pigments, and adhesive, averagely. Then add water or wine to palletize. It only need 3~5 minutes to become wet pellets.

Application Examples

urea resin, phenolics, melamine resin, epoxy resin, iron, carbon, selenium drum, battery raw material, feed, spice, salt, Si, CaCO3, and zeolite.

Type No. DY-S100 DY-S200 DY-S300
Capacity 100ι 200ι 300ι
Main spindle HP 7½HP 15HP 20HP
RPM 85/170 85/170 85/170
Sub-spindle HP 3HP 5HP 5HP
RPM 3400/1700 3400/1700 3400/1700

Rotary Granule Sieving Machine

Rotary Granule Sieving Machine

Characteristics

  • Dry type: apply to sieve block and mass shape into well mixed grain.
  • Made of stainless SUS304. Easy to settle and clean. Fitting CGMP norm.
  • Productivity: 300kg per hour
  • Size: length 1120 x width 700 x height 1320 mm
  • RPM: 400 ~ 800 ; Frequency converter control: 30~60HZ

Applications

Use in sieving whole pellet of chemical industry, chemical pharmacy, foodstuff…etc.

Single-Sided Rotary Tabletting Machine

Single-Sided Rotary Tabletting Machine

Characteristics

  1. The whole machine is through treatment of anti-rustiness hard chromium and SUS304# coating. It fits actual requirement of CGMP.
  2. For difficult tabletting products like drugs, health food, aquatic products which including plum cake, fish meal tablet,…etc, this machine may shape it easily and the hardness may reach 15 kg/㎡.
  3. With LCD screen, it appears weight gage and hardness which meet CGMP norm.

Applications

Application examples: hydration lime, dolomite, magnesia, mineral dust, Serammikkusu, Magunesshiumu hydroxide, metal powder, scrap iron, copper, steel dust, ash, aluminum, powdered coal, activated charcoal, urea resin, phenolics, melamine resin, epoxy resin, overburning ash, sludge

Type No. DY-T-12 DY-T-18 DY-T-27
HP 2HP 3HP 5HP
Max dia of press plate 20m/m 20m/m 20m/m
Max fill depth 18m/m 18m/m 18m/m
Productivity per min 420 pcs 630 pcs  
27 pcs
of die
Productivity of double layers 540 pcs
Productivity of single layer 1080 pcs
Max pressure 7000kg 9000kg 11000kg
Size L×W×H 720×680×1600
m/m
850×780×1600
m/m
950×900×1600
m/m
L×W×H
Net Weight 600kg 900kg 1800kg
Apply to tablet products of foodstuff, pharmacy, chemical industry, magnet chip/tablet, and electronic parts.
  • We also supply 3~8 cm single side tabletting machine for special form and laboratory desk-top type.

Rotating Double-Deck Tablet Pressing Machine

Rotating Double-Deck Tablet Pressing Machine

Characteristics

  1. The whole machine is through treatment of anti-rustiness hard chromium and SUS304# coating. It fits actual requirement of CGMP.
  2. For difficult tabletting products like drugs, health food, aquatic products which including plum cake, fish meal tablet,…etc, this machine may shape it easily and the hardness may reach 15 kg/㎡.
  3. With LCD screen, it appears weight gage and hardness which meet CGMP norm.

Applications

Application examples: hydration lime, dolomite, magnesia, mineral dust, Serammikkusu, Magunesshiumu hydroxide, metal powder, scrap iron, copper, steel dust, ash, aluminum, powdered coal, activated charcoal, urea resin, phenolics, melamine resin, epoxy resin, overburning ash, sludge

Type No. DY-T-12 DY-T-18 DY-T-27
HP 2HP 3HP 5HP
Max dia of press plate 20m/m 20m/m 20m/m
Max fill depth 18m/m 18m/m 18m/m
Productivity per min 420 pcs 630 pcs  
27 pcs
of die
Productivity of double layers 540 pcs
Productivity of single layer 1080 pcs
Max pressure 7000kg 9000kg 11000kg
Size L×W×H 720×680×1600
m/m
850×780×1600
m/m
950×900×1600
m/m
L×W×H
Net Weight 600kg 900kg 1800kg
Apply to tablet products of foodstuff, pharmacy, chemical industry, magnet chip/tablet, and electronic parts.
  • We also supply 3~8 cm single side tabletting machine for special form and laboratory desk-top type.

Powder Eliminator Applies Static Eliminating For Capsule And Tablet

Powder Eliminator Applies Static Eliminating For Capsule And Tablet

Characteristics

After tablet pressing of powder and grain, it will produce electrostatic adhesion on the tablet which is not easy to be eliminated through mesh sieving. This machine can delete the static electricity of tablet, then brush the powder flour and eliminate the deckle edge of both sides according to spiral guidance plus turning hostile again.

Adjustable height of connecting and speed which may avoid the overlapping pollution. It is easy to be disassembled for cleaning and dry sterilization.

Type No. DY-DE
HP 1/4HP
Electricity 110V/200V
Dia of tablet 4~19m/m
Size L600×W600×H800m/m
Weight 40kg

Automatic Coating Machine

Automatic Coating Machine

Characteristics

  1. Design of airtight and explosion-proof. You don’t need to worry about the toxicant.
  2. 36"pot, with the agitation leaf, 60kg/lot per time.
  3. With two imports spray guns which may control timing of spurts.
  4. Digital display screen: it may show the dry temperature and timing control .
  5. All items conform to the CGMP.
Type No. DY-FC
Deceleration machine type 100
Major Motor 2HP
Draw out 1/2HP
Heating blower 1/4HP
Electric hear 200V3P6kw
Size L1200×W1200×H1500m/m
Weight 350kg

Sugar Coating / Tablet Polishing Machine

Sugar Coating / Tablet Polishing Machine

Characteristics - Sugar Coating

  • 36",40"sugar coating barrel, 60 ~ 80 kg per lot.
  • 2. Rotation HP: 2HP, 220/380V, plus the frequency changer which may adjust RPM speed.

Characteristics - Sub-machine

  • Moveable cold & hot air feeder.
  • 1/2HP,110V with hot blast machine 3kw×4 pcs

Electronic Liquid Filler

Electronic Liquid Filler

Characteristics

Apply to fill a few but diverse liquid. Both automatic or manual fill are available. Set the pump to draw capacity of revolving, and settle the torsion of RPM revolution according to the jar depth. And it may be braked in a short time to reach the tolerance around ±0 . (50CC~4000CC doesn’t need to replace any accessory )

Application

It is suitable for prickly heat paste, syrup, ethyl alcohol hair-growth lotion, shampoo, stomach breast, medicine, and each kind of liquid.

Type No. DY-LF
Power 1/2HP,110V/220V,50/60HZ frequency conversion RPM
Size L600×W450×H350m/m
Weight 50kg